Swimming Pool

Steps for Building a Swimming Pool:

1- Determine the location and size of the swimming pool.
2- Excavate the ground to the required depth.
3- Pour a layer of clean gravel over the entire area.
4- Lay the first row of blocks to form the walls.
5- Build the exterior walls of the pool.
6- Apply a cement plaster to the walls,
followed by insulation.
7- Backfill around the pool and insulate the interior of the blocks.
8- Fill the pool floor with sand.
9- Pour a cement slab over the sand to create a protective layer for the floor.
10-Install the pool rebar (walls and floor) and extend plumbing and electrical work.
11- Apply a water stop strip between the walls and floor.
12- Place the wall forms on the rebar.
13- Open the forms when the pool is lit and install the electrical work before pouring the walls.
14- Pour the concrete walls and then spray them with water.
15- Apply chemical cement insulation (Sika 107) to the pool.
16-Test the pool by filling it with water for a week or more.
17- After ensuring the pool’s safety, apply cement plaster to the walls.
18-Finally, tile the walls and floor of the pool.